OIV

20.02.2020.

The OIV multiplex is transmitted via the Eutelsat 16D satellite. Receiving the OIV multiplex signal from Eutelsat 16D requires a DVB-S2 receiver and a satellite dish with a minimum diameter of 60 cm, aligned to orbital position 16° E.

Transmission to Eutelsat 16D is intended for so-called DTH (direct-to-home) distribution, i.e., for direct distribution to end users and distribution to cable distributors.

 

 

Ime slike

The satellite coverage map with the accompanying signal strength is shown. If you are in an area where the signal is the strongest, it is possible that you will need a larger reception dish.

Parameters for reception the signal from Eutelsat 16D (DVB-S2):

  • Satellite position: 16° East
  • Transmission format: DVB-S2 8PSK
  • Frequency: 11.63675 GHz
  • Polarization: Vertical (Y)
  • Symbol rate: 30000
  • FEC: 2/3

The content of OIV's signal is shown in the table. Uncoded (FTA) radio and television programming can be accessed by any DVB-S2 MPEG4 receiver, while coded content requires a DVB-S2 MPEG4 receiver with an installed Viaccess decoder module and a decoder card from the corresponding television broadcaster.

HRT

HRT-TV1 HD TV Viaaccess MPEG4
HRT-TV2 HD TV Viaaccess MPEG4
HRT-TV3 HD TV Viaaccess MPEG4
HRT-TV4 HD TV FTA MPEG4
HRTInt. HD TV FTA MPEG4
HRT-HR1 Radio FTA
HRT-HR2 Radio FTA
HRT-HR3 Radio FTA

 

HKR

HKR Radio FTA